Colour: Sonoma Oak
Estimated Delivery Time
2 - 6 working days
Compact and affordable kitchen cabinets set of 5 units in Sonoma Oak wood effect laminate finish with 1 piece of cut to size worktop. NELA 1 is a small, modern set of kitchen furniture perfect for open plan living rooms combined with a small size kitchen. Superb kitchen cabinets perfect for those on a budget.
Cabinets and fronts are made of strong and durable 16mm thick laminated chipboard in the fashionable and popular Sonoma Oak wood effect finish.
The laminated board is often chosen as a material for kitchen cabinets due to their ease of cleaning, as well as high resistance to greasy stains or high temperatures.
Kitchen Cabinets Set consists of 2 floor standing cabinets and 3 wall hanging cabinets plus 1 piece of worktop. Franke single bowl sit on sink & waste kit are included in this set.
The lower base cabinets include: an 80cm wide sink cabinet (D80ZL) AND a 40cm wide cabinet with a drawer and a piece of 40cm w x 60cm d worktop (D40S/1P/L).
The upper row of wall cabinets consists of a 80cm two-door cabinet (W80/56), 40cm 1 door cabinet (W40/56), and 60cm extractor housing cabinet (W60OKGR).
This set does include worktop for 40cm lower cabinet. NELA 1 kitchen units are complete with strong plastic easy to clean handles.
Dimensions of cabinets
2 base cabinets:
80cm cabinet for a sink without a worktop, 2 door unit D80ZL - w 800 x h 820 x d 463 mm,
40cm floor standing cabinet with w 400 x d 600mm worktop, 1 drawer, 1 door D40 S / 1 – w 400 x h 820 x d 463 mm,
After adding the worktop and moving the cabinets away from the wall, the depth of the cabinets together with the worktop is 60 cm.
3 wall hanging cabinets:
80cm two-door wall hanging cabinet W80 / 56 – w 800 x h 560 x d 304 mm,
40cm wall hanging cabinet 1 door W40 / 56 – w 400 x h 560 x d 304 mm,
60cm wall hanging cabinet to be placed above the extractor W60OKGR – w 600 x h 360 x d 304 mm,
Please note: The wall metal plates and attachments to the wall are not included with the wall cabinets.
Worktop now included. Total depth of 60cm will be achieved for base units once standard 60cm deep worktop is mounted.
Installation tip: During installation units need to be brought away from the wall by 12cm leaving 12cm service gap at the back.
Total length of all units when put in a straight line is 180cm.
Units are freestanding and do not have to be placed in a straight line.
Furniture comes flat packed ready for home assembly.
User-friendly instructions and fixings included.
Single Bowl Sit Lay On Kitchen Sink 800 x 600mm Stainless Steel
Franke single sit on sink with roll top is suitable for 800mm (80cm) wide sink unit from Nela set and is made of premium 18/10 stainless steel material and available in matt steel surface finish.
The front edge of the sink has square roll front and measures 28mm in height, they are therefore suited for standard worktops of 28-30mm thickness and suit perfectly the Nela range kitchens.
Sink is universal / reversible and can be mounted left or right-handed.
There are no pre-drilled tap holes, these can be normally cut as per individual requirements by installer/plumber with special cutter (circular cutter drill attachment can be purchased from any DIY store)
Franke sit on sinks include complete waste kit and traditional plug holes.
The floor of the sink bowls is not over-sloped, it has just enough incline for the water to drain out.
Franke sit on sinks are laid on top of the kitchen units instead of a worktop. They are also suitable for self-standing units.
Franke sit-on sinks allow for reinforced timber frame to be inserted into all four sides. Please note sink can be installed without the timber frame. Timber frame is not supplied with the sink.
Type: sit on sink – (sink goes directly on the top of the 800mm sink unit without worktop)
Description: single bowl single drainer - reversible universal left or right fit
Material: 304 Austenitic 18/10 Stainless Steel
Outside Measurements: W 800mm; D 600mm.
Measurements of the bowl: W 340mm;L 370mm; D 130mm
Waste cap supplied.
No tap hole. Tap hole can be cut out by customer according to requirements.
How to fit a Franke Sit on Sink.