Orders placed by end of Sunday 31 March will be delivered 9-16 April 2019

Double Bowl Sit Lay On Kitchen Sink 800 x 600mm Stainless Steel - Franke (DBL SINK)

Double Bowl Sit Lay On Kitchen Sink 800 x 600mm Stainless Steel - Franke (DBL SINK)

Colour: Stainless Steel

£69.95

Was £96.00
(Save £26.05 / 27%)

Fast Delivery

Estimated Delivery Time

2 - 4 working days


Loading

Share


Submit a price match request: Enquire about this product Email to a friend

Description:

Franke double sit on kitchen sink with roll top is suitable for 800mm (80cm) wide sink units and is made of premium 18/10 stainless steel material available in matt steel surface finish.

The front edge of the sink has square roll front and measures 28mm in height, they are therefore suited for standard worktops of 28-30mm thickness.

There are no pre-drilled tap holes, these can be normally cut as per individual requirements by installer/plumber with special cutter (circular cutter drill attachment can be purchase din any DIY store)

Franke sit on sinks include complete waste kit and traditional plug holes.

The floor of the sink bowls is not over-sloped, it has just enough incline for the water to drain out.

Franke sit on sinks are laid on top of the kitchen units instead of a worktop. They are also suitable for self-standing units.

Franke sit-on sinks allow for reinforced timber frame to be inserted into all four sides. Please note sink can be installed without the timber frame. Timber frame is not supplied with the sink.

Make: Franke

Type: sit on sink – (sink goes directly on the top of the 800mm sink unit without worktop)
Description: Double Bow
Material: 304 Austenitic 18/10 Stainless Steel
Outside Measurements: W 800mm; D 600mm.
Measurements of the bowl: W 340mm;L 370mm; D 130mm (x2
Waste cap supplied.

No tap hole. Tap hole can be cut out by customer according to requirements.

How to fit a Franke Sit on Sink


Customer Reviews:

Be the first the review this product.

Impact Furniture is rated 4.83 stars by Reviews.co.uk based on 362 merchant reviews

4.83 / 5 Rating
362 Reviews
Decent quality and looks nice. Instructions to assemble are not great. Only issue I had was after the unit was constructed, the draw didnt close flush on the top left corner, which is not good if you have OCD. I took it apart and assembled it again and had the same issue, which confirmed the issue was with the unit itself, probably down to the panel having a slight warp in it. I couldn’t be bothered go through all the hassle of returning it and getting a new one. Just gona have to put up with it.
Great service
Really pleased with the sideboard I purchased very good quality comes flat-packed but not hard to erect and all the fitting are good quality would definately recommend
Copyright © 2003-2019 Impact Furniture Ltd in UK, Inc. All rights reserved. Company reg. 06359447. Unit 10 Hardwicke Industrial Estate, Hardwicke Rd., Great Gransden, SG19 3BJ United Kingdom